Note: This discussion is about an older version of the COMSOL Multiphysics®software. The information provided may be out of date.
Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.
screw movement using multibody dynamics
Posted 2013年11月21日 GMT+1 18:33Structural MechanicsVersion 4.3b0 Replies
Please login with a confirmed email address before reporting spam
Hi,
I modeled screw/nut assembly in SolidWorks and transfered to Comsol multi-body dynamics module. The goal is to keep the nut fixed and give one rotation to the screw to see it is advanced by 1 pitch. However, I am stumped on implementation method. Any pointer will be greatly appreciated.
Regards,
Susant
I modeled screw/nut assembly in SolidWorks and transfered to Comsol multi-body dynamics module. The goal is to keep the nut fixed and give one rotation to the screw to see it is advanced by 1 pitch. However, I am stumped on implementation method. Any pointer will be greatly appreciated.
Regards,
Susant
0 Replies
Last Post 2013年11月21日 GMT+1 18:33
Hello Susant Patra
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.