Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.
Port Input Power
Posted 2016年12月16日 GMT+1 14:360 Replies
Please login with a confirmed email address before reporting spam
Hi everybody
In the ewfd module I'm implementing a laser-matter interaction.
I know the laser irradiance in W/m^2 but as I implemented a 2D model only, the Port Input power is needed in W. This power enters through the port which is a single line.
Now how should I convert the irradiane into the total power?
I also read this article that was never responded to:
www.comsol.com/community/forums/general/thread/40961/
Best regards and thanks in advance!
Gabriel
In the ewfd module I'm implementing a laser-matter interaction.
I know the laser irradiance in W/m^2 but as I implemented a 2D model only, the Port Input power is needed in W. This power enters through the port which is a single line.
Now how should I convert the irradiane into the total power?
I also read this article that was never responded to:
www.comsol.com/community/forums/general/thread/40961/
Best regards and thanks in advance!
Gabriel
0 Replies
Last Post 2016年12月16日 GMT+1 14:36
Hello Gabriel Voirol
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.