Note: This discussion is about an older version of the COMSOL Multiphysics®software. The information provided may be out of date.
Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.
Turbulence modeling used
Posted 2011年5月4日 GMT+2 09:50Computational Fluid Dynamics (CFD)Version 3.5a0 Replies
Please login with a confirmed email address before reporting spam
Hi everyone,
I have just one doubt.Does incompressible Navier Stokes in Fluid Dynamics module use any turbulence model for turbulent flow problems or is it using DNS or is it a laminar flow model. In documentation of Incompressible Navier Stokes of Fluid Dynamics I couldn't find a proper information regarding this.
Thanks in advance
SM Ananth
I have just one doubt.Does incompressible Navier Stokes in Fluid Dynamics module use any turbulence model for turbulent flow problems or is it using DNS or is it a laminar flow model. In documentation of Incompressible Navier Stokes of Fluid Dynamics I couldn't find a proper information regarding this.
Thanks in advance
SM Ananth
0 Replies
Last Post 2011年5月4日 GMT+2 09:50
Hello SM Ananth
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.