Note: This discussion is about an older version of the COMSOL Multiphysics®software. The information provided may be out of date.
Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.
Draw curves
Posted 2011年6月23日 GMT+2 22:54Low-Frequency Electromagnetics, MEMS & Nanotechnology, RF & Microwave Engineering, MEMS & Piezoelectric Devices, Battery Design, Parameters, Variables, & Functions, Results & VisualizationVersion 3.5a, Version 4.02 Replies
Please login with a confirmed email address before reporting spam
I use Comsol 3.5 and I simulated the electrical field between 2 electrodes. Now I want to draw a curve (X=Distance between electrodes) (Y=the Electric field) or something like this. But I can not find any special tabs for drawing these kind of curves (x,y). can someone tell me what should I do?
2 Replies
Last Post 2011年6月25日 GMT+2 01:06
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
If I understand what you are trying to do correctly, you want to parametrize your geometry and then plot a quantity that varies with the parameter vs the parameter. If that is the case, then consider upgrading to the current version, v4.2, which makes parametrizing a geometry quite easy. In v3.5, it is tedious work at best.
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Yes Jean. Thant's exactly what I want to do. It seems I should think about upgrading my version. I tried many ways but as you mentioned it is tedious work.