Note: This discussion is about an older version of the COMSOL Multiphysics®software. The information provided may be out of date.
Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.
Simulation does not converge
Posted 2019年5月17日 GMT+2 05:08RF & Microwave EngineeringVersion 4.41 Reply
Please login with a confirmed email address before reporting spam
Hello,
I am simulating a basic model in electromagnetic frequrency domain physics. The material which i am using has three values electrical conductivity, relative permmitivity, relative permeability, and density. when i put the value 40 in the electric condictivity option, the simulations converges. However, when i put 1 in the electric conducitvity option, the simulation doesn't converge.
Can anyone tell why is it happening?
Thankyou so much.
Please login with a confirmed email address before reporting spam
It probably depends on your various settings, geometry, and mesh. Check your mesh quality.
-------------------Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara