Note: This discussion is about an older version of the COMSOL Multiphysics®software. The information provided may be out of date.
Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.
parameters names must not be empty
Posted 2012年9月14日 GMT+2 00:20RF & Microwave Engineering, GeometryVersion 4.33 Replies
Please login with a confirmed email address before reporting spam
again, this is an error I ha with comsol 4.3: parameters names must not be empty
I need a quick help
attached is my comsol file, you just need to run it and see the error.
and also i attached a printed screen of my parameters table and the error window in case some one is not having comsol to run my file.
Naema
Hello Naema Othman
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
Please login with a confirmed email address before reporting spam
You have a Parametric Sweep node in your study without parameters and their values/ranges specified.
Cheers
Edgar
--
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Please login with a confirmed email address before reporting spam