Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics®software. The information provided may be out of date.

Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.

Diffraction Pattern

Posted 2013年1月15日 GMT+1 00:25RF & Microwave EngineeringVersion 3.5a, Version 4.3b2 Replies

Hamid Ohadi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hello,

This is probably a very simple question. In the diffraction patterns example in the model library, how can I extract the amplitudes (or the intensity)?

Many thanks
Hamid
2 Replies Last Post 2013年1月17日 GMT+1 12:26
RVN
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年1月17日 GMT+1 12:10
Hi!

You do this in the post processing. With your results, you get some default plots in 2D or 3D depending on the geometry, lets say you are working in acoustics (as I am) you get the pressure (Pa) and the SPL (dB). You can add more plots by right clicking on the plot group add the type you want, and choose other variables to plot i.e. Intensity, Vibrational velocity in x,y,z., acceleration etc.

You can then export the data if you want, look in the Comsol help for that part.

Hope this helps
--
/RVN
Hi! You do this in the post processing. With your results, you get some default plots in 2D or 3D depending on the geometry, lets say you are working in acoustics (as I am) you get the pressure (Pa) and the SPL (dB). You can add more plots by right clicking on the plot group add the type you want, and choose other variables to plot i.e. Intensity, Vibrational velocity in x,y,z., acceleration etc. You can then export the data if you want, look in the Comsol help for that part. Hope this helps -- /RVN
Hamid Ohadi
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年1月17日 GMT+1 12:26
That helped. Thank you!
That helped. Thank you!

Note that while COMSOL employees may participate in the discussion forum, COMSOL®software users who are on-subscription should submit their questions via theSupport Centerfor a more comprehensive response from the Technical Support team.

Suggested Content

Baidu
map