Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.
Electric interference
Posted 2025年7月1日 GMT+8 16:24Studies & Solvers, Electric DischargesVersion 6.30 Replies
Please login with a confirmed email address before reporting spam
Dear Experts,
I got the following error message:
- Parameters: "time","0"
The following feature has encountered a problem: - Feature: Time-Dependent Solver 1 (sol75/t1)
Failed to find consistent initial values.
Last time step is not converged.
The physics: Electric currents
The equation I used: (the polarity changes)
Io*sin(2*pi*f1*t)
- Io*sin(2*pi*f2*t)
Io*sin(2*pi*f1*t)
- Io*sin(2*pi*f2*t)
See at physics.png
Note: though the are two current sinks under the electric current, these are Current source as well. (I know, in Electrochemistry Module there is a designated module to current sink, but I do not have access to it. )
The solutions that did not work: - A Stationary step was added before the Time dependent study
- Using the following equations to avoid the value 0:
- Io*sin(2*pi*f*t)*(1 - exp(-t/tau)) - Io*sin(2*pi*f*t)*(t
- Changing the time range
- redo the whole study/physics
Attachments:
Hello Eva Hodovan
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
