Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics®software. The information provided may be out of date.

Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.

Induction Heating efficiency

Posted 2013年6月14日 GMT+2 17:25Low-Frequency Electromagnetics, Heat Transfer & Phase ChangeVersion 4.3b1 Reply

Nestor Bolaños Rodriguez
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi, is it there any way to calculate the efficiency of an induction heating process using comsols?
1 Reply Last Post 2013年6月17日 GMT+2 08:13
Julien Givernaud
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2013年6月17日 GMT+2 08:13
Hello Nestor,

I you can do it in measuring "electromagnetic heating [W]" on the different domains of your model.
In mf and mef physics this term is called mf.Qh and mef.Qh respectively.
So you can calculate the ratio between the term mf.Qh on a precise part and the total power dissipated on all your system.
The more simple way is to use mf physic and define a coil domain.

Best regards
Julien
Hello Nestor, I you can do it in measuring "electromagnetic heating [W]" on the different domains of your model. In mf and mef physics this term is called mf.Qh and mef.Qh respectively. So you can calculate the ratio between the term mf.Qh on a precise part and the total power dissipated on all your system. The more simple way is to use mf physic and define a coil domain. Best regards Julien

Note that while COMSOL employees may participate in the discussion forum, COMSOL®software users who are on-subscription should submit their questions via theSupport Centerfor a more comprehensive response from the Technical Support team.

Suggested Content

Baidu
map