Note: This discussion is about an older version of the COMSOL Multiphysics®software. The information provided may be out of date.
Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.
3d elasticity
Posted 2014年1月28日 GMT+1 12:20Version 4.32 Replies
Please login with a confirmed email address before reporting spam
Hello!
I need to simulate structure like a mattress: 2 surfaces connected with periodically distributed thin rods, 3d elasticity problem.
When building geometry following question arose: whether it is possible to build a single element (rod between the pieces of the surface), and then continue it periodically? Unfortunately I could not find such a function myself.
And one more question. I am using Weak Form PDE. Are there any ways to enter weak expression except explicit element-by-element? Maybe I could define somewhere elasticity tensor or in any case I should enter all more than 80 summands manually?
In addition, I would be grateful if you could advise any books or videos related to using comsol for such type of problem.
I need to simulate structure like a mattress: 2 surfaces connected with periodically distributed thin rods, 3d elasticity problem.
When building geometry following question arose: whether it is possible to build a single element (rod between the pieces of the surface), and then continue it periodically? Unfortunately I could not find such a function myself.
And one more question. I am using Weak Form PDE. Are there any ways to enter weak expression except explicit element-by-element? Maybe I could define somewhere elasticity tensor or in any case I should enter all more than 80 summands manually?
In addition, I would be grateful if you could advise any books or videos related to using comsol for such type of problem.
2 Replies
Last Post 2014年1月29日 GMT+1 13:12
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi,
I can at least help you quickly with the first issue: You can easily add periodically geometric objects using the array operation (Rightclick on Geometry1-> Transforms -> array). Just select an input object and fill out the Size and Displacement fields.
Good luck with your model.
--
Best Regards
Phillip
I can at least help you quickly with the first issue: You can easily add periodically geometric objects using the array operation (Rightclick on Geometry1-> Transforms -> array). Just select an input object and fill out the Size and Displacement fields.
Good luck with your model.
--
Best Regards
Phillip
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Thank you very much!