Note: This discussion is about an older version of the COMSOL Multiphysics®software. The information provided may be out of date.
Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.
Describing flow in fracture in porous media
Posted 2016年3月9日 GMT+1 04:07Porous Media FlowVersion 4.20 Replies
Please login with a confirmed email address before reporting spam
Hi everybody,
I am studying how to model the flow in fracture in porous media.
I want to describe 2 physical phenomena:
1. Fracture flow ( I am using Darcy' law interface under Porous media and Subsurface Flow)
2. Flow across the boundary of fracture (leak-off phenomena) (I still have no idea how to set up boundary of this).
I am using comsol 4.2
How can I describe 2 phenomena above, especially 2 ?
I hope this question makes sense!
Many thanks for reading. Im very interested to see what you guys say about this.
Any idea will be always appreciated.
Thanks for helping
I am studying how to model the flow in fracture in porous media.
I want to describe 2 physical phenomena:
1. Fracture flow ( I am using Darcy' law interface under Porous media and Subsurface Flow)
2. Flow across the boundary of fracture (leak-off phenomena) (I still have no idea how to set up boundary of this).
I am using comsol 4.2
How can I describe 2 phenomena above, especially 2 ?
I hope this question makes sense!
Many thanks for reading. Im very interested to see what you guys say about this.
Any idea will be always appreciated.
Thanks for helping
0 Replies
Last Post 2016年3月9日 GMT+1 04:07
Hello Nhan Nguyen
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.