Menu

Discussion Forum

New Discussion
查找

Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.

Time derivative only allowed with respect to mesh time

Posted 2016年3月14日 GMT+1 19:59Porous Media FlowVersion 5.210 Replies

Nhan Nguyen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi everyone,

My model contains Darcy's Law under Porous Media and it runs well.
But if I add " Deformed Geometry" Physic under mathematics to compute Time-dependent study, it occurs "Time derivative only allowed with respect to mesh time, expression d(comp1.p,t) "

How can I solve my problem ? Any suggestion ?

Best regards,
N. N

10 Replies Last Post 2017年4月28日 GMT+2 00:57
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2016年3月14日 GMT+1 20:42
Hi,

just replace d(comp1.p,t) by d(comp1.p,TIME).

Cheers
Edgar

--
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Hi, just replace d(comp1.p,t) by d(comp1.p,TIME). Cheers Edgar -- Edgar J. Kaiser emPhys Physical Technology http://www.emphys.com
Nhan Nguyen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2016年3月15日 GMT+1 06:06
Hi Edgar,

Thanks a lot for your help !

But I can not find d(comp1.t)!
For example, I use Darcy's Law under porous media. Where can I replace d(comp1.p,t) by d(comp1.p,Time) ?

Best regards,
N. N
Hi Edgar, Thanks a lot for your help ! But I can not find d(comp1.t)! For example, I use Darcy's Law under porous media. Where can I replace d(comp1.p,t) by d(comp1.p,Time) ? Best regards, N. N
Edgar J. Kaiser Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2016年3月15日 GMT+1 09:42
Sorry, I can't tell you. I observed this error in one of my time dependent models when I used the d() operator for post processing. You may consider to submit the case to COMSOL support or upload it to the forum.
However, I don't do CFD, so I can't check your model but other may be willing to do so.

Take care about the spelling, the specifier in the expression has to be TIME, not Time. Case matters!

Cheers
Edgar

--
Edgar J. Kaiser
emPhys Physical Technology
www.emphys.com
Sorry, I can't tell you. I observed this error in one of my time dependent models when I used the d() operator for post processing. You may consider to submit the case to COMSOL support or upload it to the forum. However, I don't do CFD, so I can't check your model but other may be willing to do so. Take care about the spelling, the specifier in the expression has to be TIME, not Time. Case matters! Cheers Edgar -- Edgar J. Kaiser emPhys Physical Technology http://www.emphys.com
Nhan Nguyen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2016年3月15日 GMT+1 11:36
Hi Edgar,

Thanks a lot for your help !

Thank you very much !

Best regards,
N.N
Hi Edgar, Thanks a lot for your help ! Thank you very much ! Best regards, N.N
Nhan Nguyen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2016年3月15日 GMT+1 19:00
Hi everyone,

Can you help me run CFD module and Deformed Mesh under Mathematics together ?

Replacing d(comp1.p,t) by d(comp1.p,TIME) is a very good solution but I can not find where to do that !

Best regards,
N.N
Hi everyone, Can you help me run CFD module and Deformed Mesh under Mathematics together ? Replacing d(comp1.p,t) by d(comp1.p,TIME) is a very good solution but I can not find where to do that ! Best regards, N.N
Mingji Zhang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2016年3月19日 GMT+1 07:19
You need to check the week form under Darcy Module, replace all d(XXX, t) term to d(XXX, TIME).

Good luck.
You need to check the week form under Darcy Module, replace all d(XXX, t) term to d(XXX, TIME). Good luck.
Nhan Nguyen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2016年3月19日 GMT+1 09:32
Hi Mingji,

Thanks a lot for your help ! It's such a amazing idea. It gave me a lot of creative ideas.

But I can not still find weak form under Darcy Module where I can replace d(XXX, t) term to d(XXX, TIME).
Can you help me a little bit more by showing more detail how to do that because I'm a beginner?

Best regards,
N.N
Hi Mingji, Thanks a lot for your help ! It's such a amazing idea. It gave me a lot of creative ideas. But I can not still find weak form under Darcy Module where I can replace d(XXX, t) term to d(XXX, TIME). Can you help me a little bit more by showing more detail how to do that because I'm a beginner? Best regards, N.N
Nhan Nguyen
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2016年3月19日 GMT+1 09:45
Hi Mingji,

I found where to replace what I want!
Thank you very much one more time !

Best regards,
N.N
Hi Mingji, I found where to replace what I want! Thank you very much one more time ! Best regards, N.N
Peter Purple
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 8 years ago 2016年8月16日 GMT+2 20:25


just replace d(comp1.p,t) by d(comp1.p,TIME).




Hi Edgar,

In my case, comp1.p is an explicit function of time, and I have it written as comp1.p = t^(-0.5)

I did change d(comp1.p,t) to d(comp1.p,TIME), but I'm getting the error "cannot evaluate negative power of zero". Does this mean that I need to substitute 't' with 'TIME' in the expression for comp1.p as well?

Thanks!
[QUOTE] just replace d(comp1.p,t) by d(comp1.p,TIME). [/QUOTE] Hi Edgar, In my case, comp1.p is an explicit function of time, and I have it written as comp1.p = t^(-0.5) I did change d(comp1.p,t) to d(comp1.p,TIME), but I'm getting the error "cannot evaluate negative power of zero". Does this mean that I need to substitute 't' with 'TIME' in the expression for comp1.p as well? Thanks!
Yanxiang Yu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 7 years ago 2017年4月28日 GMT+2 00:57
Hi Nhan,

Could you please specify where to modify this equation?
Is it under Analytical Solution settings or PDE settings?

Thank you,
Hi Nhan, Could you please specify where to modify this equation? Is it under Analytical Solution settings or PDE settings? Thank you,

Note that while COMSOL employees may participate in the discussion forum, COMSOL®software users who are on-subscription should submit their questions via theSupport Centerfor a more comprehensive response from the Technical Support team.

Suggested Content

Baidu
map