Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.
Airflow around rotating airfoils
Posted 2016年8月24日 GMT+2 04:520 Replies
Please login with a confirmed email address before reporting spam
Hi,
I've done a bit of work with COMSOL in the past, but mostly steady state projects. Now, I'm trying to model airflow around rotating airfoils, similar to a vertical axis wind turbine in 2 dimensions.
My set up is a large rectangle with a rotating circular domain inside of it that contains three airfoils spaced in a circular pattern. I used the deforming geometry feature to set this up. I set up identity pairs and flow continuity conditions for the interface between the rectangle and circle. This is pictured below.
Next, I wanted to see how the system behaves when placed in a uniform flow, so I added a k-epsilon turbulence model and set up inlet and outlet conditions on the large rectangle. I tried running this however it will not converge. My convergence plot is largely discontinuous.
Does anyone have any tips to help me reach convergence, or am I going about this wrong?
Thank you.
I've done a bit of work with COMSOL in the past, but mostly steady state projects. Now, I'm trying to model airflow around rotating airfoils, similar to a vertical axis wind turbine in 2 dimensions.
My set up is a large rectangle with a rotating circular domain inside of it that contains three airfoils spaced in a circular pattern. I used the deforming geometry feature to set this up. I set up identity pairs and flow continuity conditions for the interface between the rectangle and circle. This is pictured below.
Next, I wanted to see how the system behaves when placed in a uniform flow, so I added a k-epsilon turbulence model and set up inlet and outlet conditions on the large rectangle. I tried running this however it will not converge. My convergence plot is largely discontinuous.
Does anyone have any tips to help me reach convergence, or am I going about this wrong?
Thank you.
Attachments:
0 Replies
Last Post 2016年8月24日 GMT+2 04:52
Hello Zachary Allen
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.