Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics®software. The information provided may be out of date.

Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.

Defining material properties

Posted 2011年3月9日 GMT+1 15:44MaterialsVersion 3.5a2 Replies

Atilla Savas
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi Everybody,

How can I define the following thermal conductivity in COMSOL 3.5a

k=10+0.0014*T if T<780
k=12+0.0013*T if 780k=210-0.1*T if 1672k=8 +0.01*T if 1727
Is it possible to give conditional material properties?

If someone helps me, I will appreciate it a lot..

Thanks.

2 Replies Last Post 2011年3月9日 GMT+1 18:14
Xiaogai Li
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年3月9日 GMT+1 16:34
Write it into logical expression should work?

k=(10+0.0014*T)*(T<780)+(12+0.0013*T)*(T>780&&T<1672)+(210-0.1*T)*(T>1672&&T<1727)+(8 +0.01*T)*(T>1727)
Write it into logical expression should work? k=(10+0.0014*T)*(T780&&T1672&&T1727)
Atilla Savas
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2011年3月9日 GMT+1 18:14
Thank you,

I will try the logical expressions.

Thank you, I will try the logical expressions.

Note that while COMSOL employees may participate in the discussion forum, COMSOL®software users who are on-subscription should submit their questions via theSupport Centerfor a more comprehensive response from the Technical Support team.

Suggested Content

Baidu
map