Menu

Discussion Forum

New Discussion
查找

Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.

Frequency dependend amplitude of a monopole source

Posted 2018年11月7日 GMT+1 16:18Acoustics & VibrationsVersion 5.2a1 Reply

Stefan Willems
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I like to use a monopole acoustic source but with an amplitude that varies with frequency. Is this possible ? I could imagine to have an acoustic source with an amplitude vector and a frequency vector.

Best regards

Stefan Willems

1 Reply Last Post 2018年11月7日 GMT+1 20:09
Sergei Yushanov Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 6 years ago 2018年11月7日 GMT+1 20:09

Stefan,

Use expression or interpolation function to define source amplitude as a function of frequency. Then, multiply source by the defined expression. The last step is to add parametric sweep over the source frequency, as shown in the attached mph file.

Regards,

Sergei

Stefan, Use expression or interpolation function to define source amplitude as a function of frequency. Then, multiply source by the defined expression. The last step is to add parametric sweep over the source frequency, as shown in the attached mph file. Regards, Sergei

Note that while COMSOL employees may participate in the discussion forum, COMSOL®software users who are on-subscription should submit their questions via theSupport Centerfor a more comprehensive response from the Technical Support team.

Suggested Content

Baidu
map