Menu

Discussion Forum

New Discussion
查找

Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.

How to get Capacitance matrix from Stationary Source Sweep?

Posted 2019年6月15日 GMT+2 01:13Low-Frequency ElectromagneticsVersion 5.43 Replies

ModelingRF
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Hi,

I am trying to find capacitance matrix for a simple 2D geometry of conductors. Using the Stationary Source Sweep study, I got the electric potential plot for the individual terminals.

But in the results node, it shows no values for capacitance matrix. What setting do we need to extract capacitance matrix from Stationary Source Sweep?

Thanks.

3 Replies Last Post 2019年6月19日 GMT+2 15:05
Sergei Yushanov Certified Consultant
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 5 years ago 2019年6月17日 GMT+2 14:30
Updated: 5 years ago 2019年6月17日 GMT+2 14:26

Attached is model with 2 x 2 Maxwell and mutual capacitance matrices. To get this result you have to use "Activate manual terminal sweep" and add Parametric Sweep study step.

Sergei

Attached is model with 2 x 2 Maxwell and mutual capacitance matrices. To get this result you have to use "Activate manual terminal sweep" and add Parametric Sweep study step. Sergei
Walter Frei COMSOL Employee

Please login with a confirmed email address before reporting spam

Posted: 5 years ago 2019年6月17日 GMT+2 15:36
Updated: 5 years ago 2019年6月19日 GMT+2 15:25

See also:https://www.comsol.com/blogs/how-to-calculate-a-capacitance-matrix-in-comsol-multiphysics

See also:
ModelingRF
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 5 years ago 2019年6月19日 GMT+2 15:05
Updated: 5 years ago 2019年6月19日 GMT+2 15:00

Thanks, Sergei. Appreciated for your help.

Thanks, Sergei. Appreciated for your help.

Note that while COMSOL employees may participate in the discussion forum, COMSOL®software users who are on-subscription should submit their questions via theSupport Centerfor a more comprehensive response from the Technical Support team.

Suggested Content

Baidu
map