Discussion Forum

Forum Home

New Discussion

Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.

How to view cross section temperiture distribution?

Posted 2012年5月17日 GMT+2 19:463 Replies

Baofeng Huang

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear all,
I finished the calaulation of a very simple model of Heat Transfer. How to view the cross sectional temperiture distribution?

Thanks

Baofeng

3 Replies Last Post 2012年5月18日 GMT+2 09:50

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago

Hi

study the Data Set right click Cut plane and related options, then add a plot surface pointing to your cut plane

--
Good luck
Ivar

Baofeng Huang

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago

Hey Ivar,
I tried it. It works, But How to hide the contour of the model and exhibit the cut plane only?

Thanks!!
Baofeng

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago

Hi

the black contour is adjusted in the main plot node options

--
Good luck
Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL^®software users who are on-subscription should submit their questions via theSupport Centerfor a more comprehensive response from the Technical Support team.

Discussion Forum

How to view cross section temperiture distribution?

Suggested Content