Menu

Discussion Forum

New Discussion
查找

Note: This discussion is about an older version of the COMSOL Multiphysics®software. The information provided may be out of date.

Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.

PML with structural mechanics

Posted 2012年7月31日 GMT+2 17:44RF & Microwave Engineering, Wave OpticsVersion 4.33 Replies

Rachel Westwood
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

I am trying to use a PML with my model. The model uses solids and shells in the structural mechanics. The PML is around a solid block on five sides. However when I attempt to solve I get the error Duplicate variable names for a large list of shell variables (see attached). Can anyone tell me what I am doing wrong. Thanks.

Attachments:

3 Replies Last Post 2014年3月9日 GMT+1 08:02
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年8月2日 GMT+2 20:33
Hi

that looks very weird you must ahve managed to define domains double up, but one cannot tell how, just like that. Try to find a similar model in the model library and read through the doc, then try to recreate your model from scratch, that is the best I can propose ;)

--
Good luck
Ivar
Hi that looks very weird you must ahve managed to define domains double up, but one cannot tell how, just like that. Try to find a similar model in the model library and read through the doc, then try to recreate your model from scratch, that is the best I can propose ;) -- Good luck Ivar
Rachel Westwood
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2012年8月3日 GMT+2 11:50
Thanks Ivar. I started from scratch and defined the solid mechanics physics before the shell physics and this time it worked.
Thanks Ivar. I started from scratch and defined the solid mechanics physics before the shell physics and this time it worked.
Yuan Weiguang
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2014年3月9日 GMT+1 08:02
Hi Ivar

I want to use PML simulate a model, but I do not know how to set PML when change the air by water. I have looked many model in the Model Library ,all the environment they used is air ,I want to use water environment , could I use PML as they used without any change ? Or what need to change ?

Thank you!

Weiguang
Hi Ivar I want to use PML simulate a model, but I do not know how to set PML when change the air by water. I have looked many model in the Model Library ,all the environment they used is air ,I want to use water environment , could I use PML as they used without any change ? Or what need to change ? Thank you! Weiguang

Note that while COMSOL employees may participate in the discussion forum, COMSOL®software users who are on-subscription should submit their questions via theSupport Centerfor a more comprehensive response from the Technical Support team.

Suggested Content

Baidu
map