Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.
electric field strength at surface - BEM
Posted 2023年5月9日 GMT+2 03:00Electromagnetics, Results & VisualizationVersion 6.02 Replies
Please login with a confirmed email address before reporting spam
The electric field strength at surface is different from that in the air domain acc. to AC/DC BEM results. Around 1 in the air domain and 0.5 at conductor surface.
How to set to make these two results matach? Since I don's care the transition of the electric field strength from conductor to air, the max. value is actually what I need.
Attachments:
Please login with a confirmed email address before reporting spam
Is this an electrostatics problem? I encourage you to post your .mph file to the forum so that others can examine it and offer their suggestions.
-------------------Scientific Applications & Research Associates (SARA) Inc.
www.comsol.com/partners-consultants/certified-consultants/sara
Please login with a confirmed email address before reporting spam
As usual, can't say anything definitive without the .mph file.
However- if you evaluate a quantity at a surface- without specifying upside or downside- Comsol computes the average.