Discussion Forum

Forum Home

New Discussion

Note: This discussion is about an older version of the COMSOL Multiphysics^®software. The information provided may be out of date.

Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.

Induced current/voltage from one coil in another

Posted 2013年2月22日 GMT+1 17:12Low-Frequency ElectromagneticsVersion 4.3a2 Replies

Matthias Weber

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Dear community,
I just started to use COMSOL. Now, I'm trying to model two cylindrical coils with different radius but at the same position (also same length and thickness). I'd like to apply a frequency dependent current on the inner one and simulate the induced voltage (and current) in the outer one. Now, I'm not sure how to model the outer coil. Do I have to connect it to a circuit or is there a way to use the multi-turn coil domain?

Thanks for your help and suggestions!

2 Replies Last Post 2013年2月26日 GMT+1 19:40

Sergei Yushanov Certified Consultant

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago

Matthias,

These models might give some insight on modeling coils interaction:

www.comsol.com/showroom/gallery/12653/

www.comsol.com/showroom/gallery/15/

www.comsol.com/showroom/gallery/12679/

Regards,
Sergei

Matthias Weber

Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago

Thank you, Sergei! That could help me a lot.

Note that while COMSOL employees may participate in the discussion forum, COMSOL^®software users who are on-subscription should submit their questions via theSupport Centerfor a more comprehensive response from the Technical Support team.

Discussion Forum

Induced current/voltage from one coil in another

Suggested Content