Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.
Ignoring or excluding mesh in some regions while being able to simulate
Posted 2025年7月12日 GMT+8 01:58RF & Microwave Engineering2 Replies
Please login with a confirmed email address before reporting spam
I wanted to ask if it is possible to exclude some regions when modeling the mesh for a large or complex system.
For example, modeling a micro antenna with centimeter-size wires is too dense a mesh to model. Along with the air region around.
So i wanted to see if one could ignore some regions that are unimportant, so as to save space and time, whilst still simulating somehow.
Please login with a confirmed email address before reporting spam
Maybe look into virtual operations.
-------------------René Christensen, PhD
Acculution ApS
www.acculution.com
info@acculution.com
Please login with a confirmed email address before reporting spam
For many antenna problems the interior of conductors can be excluded from the simulation and the impedance boundary condition applied on the conductor surfaces.
