Note: This discussion is about an older version of the COMSOL Multiphysics®software. The information provided may be out of date.
Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.
Solidworks model meshing issue
Posted 2013年3月27日 GMT+1 08:35Low-Frequency Electromagnetics, Interfacing, CAD Import & LiveLink™ Products for CADVersion 4.32 Replies
Please login with a confirmed email address before reporting spam
I created geometry of a saddle coil pair in Solidworks and then I imported it to COMSOL using the geometry import option. When I build meshes, it gives error of meshing around edges and corners.
COMSOL imports edges and surfaces. How can I import the part as a solid geometry?
I used livelink for solidworks too and got the same error.
COMSOL imports edges and surfaces. How can I import the part as a solid geometry?
I used livelink for solidworks too and got the same error.
2 Replies
Last Post 2013年5月8日 GMT+2 19:59
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Hi
strange, as normally SolidWorks imports 3D bodies as 3D bodies and not surfaces and lines only, have you checked the options for import, and could it be that you need a higher resolution as you might have some "small" or thin features?
And what about versions ? check compatibility !
--
Good luck
Ivar
strange, as normally SolidWorks imports 3D bodies as 3D bodies and not surfaces and lines only, have you checked the options for import, and could it be that you need a higher resolution as you might have some "small" or thin features?
And what about versions ? check compatibility !
--
Good luck
Ivar
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Comsol imports 3D objects. If you are interested, you can check for the surfaces and edges as well!
Check the import option; you will be able to resolve the issue!
Check the import option; you will be able to resolve the issue!