Note: This discussion is about an older version of the COMSOL Multiphysics®software. The information provided may be out of date.
Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.
modification of superconducting_wire
Posted 2014年1月8日 GMT+1 16:57Low-Frequency ElectromagneticsVersion 4.3a0 Replies
Please login with a confirmed email address before reporting spam
I've created a modification of "superconducting_wire" from model library (AC/DC Module --> Other Industrial Applications) with two superconducting cores. It works properly, but when I try to simulate situation with reversed current in one of cores, model crashes.
To make current reversed I've define variable Ez_sc for second core as:
-E0*((Jz_sc-Jc)*flc2hs(Jz_sc-Jc-dJ,dJ)/Jc)^alpha
To make current reversed I've define variable Ez_sc for second core as:
-E0*((Jz_sc-Jc)*flc2hs(Jz_sc-Jc-dJ,dJ)/Jc)^alpha
0 Replies
Last Post 2014年1月8日 GMT+1 16:57
Hello Pawel Wasiak
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.