Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.
Meshing without high mesh density and with high minimum mesh quality
Posted 2014年10月28日 GMT+1 23:47Geometry, Mesh1 Reply
Please login with a confirmed email address before reporting spam
I'm trying to mesh the interface between what is essentially a cylinder and its base. The model is imported and I would prefer not creating a chamfer or fillet unless I can edit an imported model without much hassle.
I tired using smaller elements but the resultant minimum mesh quality remains poor. To the order of e-5.
I would really appreciate any inputs. Kindly find a model attached with this post.
Cheers!!
I tired using smaller elements but the resultant minimum mesh quality remains poor. To the order of e-5.
I would really appreciate any inputs. Kindly find a model attached with this post.
Cheers!!
Attachments:
1 Reply
Last Post 2015年12月4日 GMT+1 16:13
Hello Arjun Dubhashi
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.
Please login with a confirmed email address before reporting spam
Posted:
10 years ago
The Design Module allows you to add a 3D fillet, including to an imported geometry. See
www.comsol.com/design-module.
Best,
Jeff
Best,
Jeff