Note: This discussion is about an older version of the COMSOL Multiphysics®software. The information provided may be out of date.
Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.
Extract data from comsol to matlab
Posted 2014年11月28日 GMT+1 17:52RF & Microwave Engineering, Interfacing, Results & VisualizationVersion 4.41 Reply
Please login with a confirmed email address before reporting spam
Dear All,
I am running the parameter scan simulation. After that the case is extremely so that I can't open by GUI.
I want to check the integration of loss of one domain changing with three scanned parameter.
I need to extract these data from COMSOL to Matlab by livelink
How should I write the command in matlab script?
Thanks for the help in advance.
Best regards
Yanrui
I am running the parameter scan simulation. After that the case is extremely so that I can't open by GUI.
I want to check the integration of loss of one domain changing with three scanned parameter.
I need to extract these data from COMSOL to Matlab by livelink
How should I write the command in matlab script?
Thanks for the help in advance.
Best regards
Yanrui
1 Reply
Last Post 2014年12月1日 GMT+1 10:22
Please login with a confirmed email address before reporting spam
Posted:
1 decade ago
Dear Yanrui,
what you need is the command mphglobal, in your case
power= mphglobal(model,'int_v(emw.Qh)')
should do the job. See detailed answers in your support case.
Best regards,
Sven
what you need is the command mphglobal, in your case
power= mphglobal(model,'int_v(emw.Qh)')
should do the job. See detailed answers in your support case.
Best regards,
Sven