Menu

Discussion Forum

New Discussion
查找

Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.

Having trouble about importing 3D geometry

Posted 2015年3月13日 GMT+1 09:42GeometryVersion 5.0, Version 5.1, Version 5.24 Replies

雷 李
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

When I am trying to import a 3D geometry file named XX.SLDPRT(a Solidworks file) or XX.ipt(Inventor file), it turns out to show: D:\Program Files\COMSOL\COMSOL50\Multiphysics\lib\win64\csjcad.dll: Can't find dependent libraries. (attached file)
How should I do? There is no problem when I'm importing mphbin file.

Attachments:

4 Replies Last Post 2016年5月14日 GMT+2 04:35
COMSOL Moderator

Hello 雷 李

Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.

If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.

WRS433
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2015年6月4日 GMT+2 20:09
I would like to second this error. I am seeing the same thing, and none of my licenses will work unless I go into the Geometry section and select COMSOL Kernel, instead of the CAD import Kernel. Does this problem have a solution yet?

Thanks,
-Matt
I would like to second this error. I am seeing the same thing, and none of my licenses will work unless I go into the Geometry section and select COMSOL Kernel, instead of the CAD import Kernel. Does this problem have a solution yet? Thanks, -Matt
Anderson Goncalves
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago 2015年6月17日 GMT+2 14:15
I am also this difficulty when I try to import 3D model of the inventor. What is the solution ?
Thank you!
Anderson
I am also this difficulty when I try to import 3D model of the inventor. What is the solution ? Thank you! Anderson
Matthew Aldous
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 10 years ago 2016年1月14日 GMT+1 11:47
I'm also experiencing this error message. I intend to try converting the .iam file I was trying to import to an stp file, and then importing that.
I'm also experiencing this error message. I intend to try converting the .iam file I was trying to import to an stp file, and then importing that.
Ma Shuai
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 9 years ago 2016年5月14日 GMT+2 04:35
我也碰到了这个问题，我是这样解决的：在文件-首选项-几何中我把几何表示的选项全部改成了comsol内核，之后就好了。但是我在之前的电脑上使用时，都是使用的CAD内核，同样没问题，感觉好奇怪。祝各位好运！
我也碰到了这个问题，我是这样解决的：在文件-首选项-几何中我把几何表示的选项全部改成了comsol内核，之后就好了。但是我在之前的电脑上使用时，都是使用的CAD内核，同样没问题，感觉好奇怪。祝各位好运！

Note that while COMSOL employees may participate in the discussion forum, COMSOL®software users who are on-subscription should submit their questions via theSupport Centerfor a more comprehensive response from the Technical Support team.

Suggested Content

Baidu
map