Note: This discussion is about an older version of the COMSOL Multiphysics®software. The information provided may be out of date.
Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.
Condensation in building envelope
Posted 2015年3月23日 GMT+1 21:00Heat Transfer & Phase ChangeVersion 4.40 Replies
Please login with a confirmed email address before reporting spam
Hi everyone,
I am trying to model thermal bridge and condensation for building envelope by comsol 4.4. But I could not model the condensation. Do you have any model and/or suggestion for this problem?
Best regards.
I am trying to model thermal bridge and condensation for building envelope by comsol 4.4. But I could not model the condensation. Do you have any model and/or suggestion for this problem?
Best regards.
0 Replies
Last Post 2015年3月23日 GMT+1 21:00
Hello Zafer Yüce
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.