Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.
Laser Heat Flux?
Posted 2010年7月8日 GMT+2 21:360 Replies
Please login with a confirmed email address before reporting spam
Hi, I have (seemingly) very simple problem I am trying to model. I am trying to see how a 10 nW laser (not a point source) heats up a very thin membrane during a span of 5 seconds. I am not sure what to input for the inward heat flux value for the boundary where the laser would be incident on the surface. Inputting a number and solving does not seem to change the temperature of the object in any place.
Also, any help with meshing the object (0.85 mm by 1.5 microns) would be appreciated as well.
Thanks!
Also, any help with meshing the object (0.85 mm by 1.5 microns) would be appreciated as well.
Thanks!
0 Replies
Last Post 2010年7月8日 GMT+2 21:36
Hello Joseph Sun
Your Discussion has gone 30 days without a reply. If you still need help with COMSOL and have an on-subscription license, please visit our Support Center for help.
If you do not hold an on-subscription license, you may find an answer in another Discussion or in the Knowledge Base.