Note: This discussion is about an older version of the COMSOL Multiphysics®software. The information provided may be out of date.
Discussion ClosedThis discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one,click here.
How to define a variable with simulated result
Posted 2016年1月10日 GMT+1 14:11Chemical Reaction Engineering, Materials, Parameters, Variables, & Functions, Results & Visualization, Studies & SolversVersion 4.41 Reply
Please login with a confirmed email address before reporting spam
Hi, everyone, I am trying to run COMSOL file in COMSOL 4.4. My file originally works in COMSOL 3.5, but when i run it in COMSOL 4.4, one variable appears to be orange and I cannot get any result. I am trying to simulate a ultraviolet light go through a resin and cure the resin. my defined variable is related to the resin depth which is z axis value in the final result. I used to put z to define the relationship in COMSOL 3.5 and it works. I am wandering how I should define in COMSOL 4.4. I attached some photos to better illustrate the situation.
Thanks in advance.
Ying
Thanks in advance.
Ying
Attachments:
1 Reply
Last Post 2016年1月10日 GMT+1 20:30
Please login with a confirmed email address before reporting spam
Posted:
9 years ago
Hi
the updates and changes from v3 to V4 are quite drastic, most internal variables have changed names, so my advise: rebuild your model from scratch in the new version, then start modifying it or adapt it. The power of the new modules makes the model building a rather quick task (once you find your way comfortably through the model nodes ;)
--
Good luck
Ivar
the updates and changes from v3 to V4 are quite drastic, most internal variables have changed names, so my advise: rebuild your model from scratch in the new version, then start modifying it or adapt it. The power of the new modules makes the model building a rather quick task (once you find your way comfortably through the model nodes ;)
--
Good luck
Ivar